Products>>LED Flood Light>>LED Flood Light AU02-SFL 36W
Product Name:

LED Flood Light AU02-SFL 36W


Product Type:LED Flood Light
Product Description:

LED Flood Light AU02-SFL 36W,LED Flood lightSingle Color adopts 1W high power LED as its luminous body, which is of high brightness, stable performance, long longevity and low power consumption. The input voltage is 110VAC or 220VAC. Its current is stable ensured by high efficient and wide voltage constant current driver. With aluminum housing and 5mm high transparent toughened glass surface, it can achieve protection class IP65. Special aluminum heatsink contacts the PCB board so closely that it shortens the path of heat-sinking to ensure longer life of the product. Ventilation condition is needed for the application, or heat-sinking device should be used. This product can be installed very conveniently by using matched aluminum mounting base and the light direction can be adjusted at will. It can be widely used for partial lighting, indirect lighting, spot and flood lighting, etc.




1.Picture

2.Feature

Technical Parameters:
Color range – Different brightness of red, green & blue
LEDs, combine to produce 16,000,000 colors.
Light source – 1W High Power LEDs
LED color/Quantity – Red12, Green 12, Blue 12
Beam angle – 25/45°
Light spacing – 20M
Digital interface – Standard DMX compatible
Controlling system – DMX512
DMX address – Generated by digital pipeline
Housing material – Aluminum alloy
Connecting mode – Standard signal cord
Connector – 3-pin signal connector

Electrical specification:
Operating voltage – AC90-264V/24V
Operating current – Max.2A
Power consumption – 36Watts
Protection rating – IP65

Environmental specification
Operating temperature: -20°C to 40°C (using the
industrial components)
Size – L320*W145*H225
Weight – 3.9Kgs (8.6lbs.)

Color effects
Static display – Static display of 16,000,000 colors by
mixing colors
Flashing change – Colors transition from high
brightness to low brightness
Cross fade – Colors alternate
Chasing change – Colors chase one another
Flowing function – Single color flowing regularly
3.Dimension

4.Caution

Connect the input connector of the first fixture to the output connector of the DMX console; connec the output connector of first fixture to the input connector of the second fixture; etc., as shown in following diagram.

1) Put the output connector of the first fixture into a Φ20 thermal shrinking sleeve with glue inside The end of the sleeve should be 40mm from the joint of the cable and the connector.
2) Put the input connector of the second fixture into theΦ20 thermal shrinking sleeve so as to connect it with the output connector of the first fixture.
3) Blow and shrink the sleeve ends with a hair drier so that the sleeve and the signal cable are tightly contacted for waterproof purpose.
The signal output connector of the last fixture (maximum 30 fixtures) of each series must be sealed with aΦ20 thermal shrinking sleeve and blow and shrink it with a hair drier for waterproof purpose.